Cellulose Insulation Calculator
Cellulose is sold by the bag, and each bag covers less area the deeper you go — a 19 lb bag covers about 37 sq ft at R-19 but only 12 sq ft at R-49. This uses the manufacturer's coverage chart to count bags for your attic, tells you how deep to blow it, and sizes dense-pack cellulose for closed walls.
Your project
R-49 in zones 2–3, R-60 in zones 4–8 (2021 IECC).
About R-2.5 per inch of old fiberglass, R-3.5 of old cellulose.
The chart is a minimum; 10% covers uneven depth and obstructions.
Your results
- Bags of cellulose (19 lb)
- 92 bags
- Adds R-49
- Coverage per bag
- 12 sq ft at R-49
- Blow it to (installed depth)
- 15.2 in
- Settled depth
- 13.7 in
- Cellulose settles about 10% in the first months
- Weight on the ceiling
- 1,753 lb
- Installed cost
- $1,796 – $2,848
- Bags at retail plus $0.60–$1.10/sq ft labor
Estimates use typical US material and labor pricing. Confirm quantities against the coverage chart on the bag before you buy.
Gear for this job
Blown In Cellulose Insulation
Attic Measuring Rulers - Attic Insulation R-Value Ruler,Thick Card Stock,25 inches,for Ceiling Insulators Insulation (30)
$26.99
Check price on Amazon
Aimee’s Workshop Attic Anchor - Insulation Ruler Depth Markers for Blown-in Insulation 30 Pack, 24 Inch Heavy Cardstock
$29.98
Check price on Amazon
Attic Insulation R-Value Ruler - Attic Measuring Rulers, 25 Inch Colorful Card Stock Attic Depth Ruler for Home,(100 per Pack (100)
$42.99
Check price on Amazon
Respirator Mask Insulation Work
As an Amazon Associate I earn from qualifying purchases. Product links on this page may earn us a commission at no extra cost to you.
Prices as of Oct 1, 2026, 4:38 AM UTC. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
How this calculator works
- Coverage per bag = interpolated from the 19 lb bag chart (R-19 36.7 · R-30 21.7 · R-38 16.4 · R-49 12.0 · R-60 9.3 sq ft)
- Bags = area ÷ coverage per bag × (1 + extra %)
- Depth = chart settled and installed thickness at your R-value
- Walls: bags = wall area × 0.88 × cavity depth ÷ 12 × 3.5 lb ÷ 19.05 lb × (1 + extra %)
Cellulose bags for 1,000 sq ft of attic, by R-value (19 lb bags)
| R-value | Sq ft per bag | Bags (chart) | Bags +10% | Settled depth | Blow to |
|---|---|---|---|---|---|
| R-19 | 36.7 | 27.2 | 30 | 5.6 in | 6.2 in |
| R-30 | 21.7 | 46.1 | 51 | 8.6 in | 9.6 in |
| R-38 | 16.4 | 61 | 68 | 10.8 in | 12 in |
| R-49 | 12 | 83.3 | 92 | 13.7 in | 15.2 in |
| R-60 | 9.3 | 107.5 | 119 | 16.5 in | 18.4 in |
From GreenFiber's attic card for its 19.05 lb bag (INS541LD). Other brands and bag sizes differ — the chart on your bag decides.
Why cellulose needs more bags than people expect
Cellulose is dense. At R-49 the chart calls for about 1.6 lb per square foot, so a 19 lb bag covers only about 12 sq ft; at R-30 it covers about 22. A 1,000 sq ft attic taken from bare to R-49 needs 84 bags by the chart — about 92 once you allow 10% for uneven depth — and weighs about 1,750 lb. Many online rules of thumb assume older 25–30 lb bags or much lighter fiberglass and come out at half that.
The chart gives two thicknesses. Blow to the initial installed depth (15.2 in for R-49); within a few months it settles to the minimum settled depth (13.7 in), which is what delivers the rated R-value. Staple depth rulers to trusses across the attic before you start so you can see the depth from the hatch.
Dense-pack walls
In closed walls, cellulose is blown through 1–2 in holes at about 3.5 lb per cubic foot so it cannot settle and leave a gap at the top of the cavity. A 2×4 wall takes a little over 1 lb per square foot of wall, so 1,000 sq ft of wall needs about 52 bags. Dense-packing needs a high-pressure blower and a fill tube; the free big-box machines are made for loose fill in attics.
Keep going
- Step by step: how to blow cellulose insulation into an attic
Frequently asked questions
How many bags of cellulose do I need?
Divide the attic area by the bag's coverage at your R-value. For a 19 lb bag that is about 36.7 sq ft per bag at R-19, 21.7 at R-30, 16.4 at R-38, 12.0 at R-49 and 9.3 at R-60. So 1,000 sq ft at R-49 is 84 bags, or about 92 with 10% extra.
How many bags of blown-in cellulose for a 1,500 sq ft attic?
At R-38, about 92 bags (101 with 10% extra); at R-49, 125 bags (138 with extra); at R-60, about 162 bags (178). That is for common 19 lb bags; check the coverage chart on your bag.
How deep should blown cellulose be for R-49?
Blow it to about 15 inches; it settles to about 13.7 inches, which is the depth that delivers R-49. For R-38 blow about 12 inches (10.8 settled), and for R-60 about 18.4 inches (16.5 settled).
Is cellulose better than fiberglass in an attic?
It reaches a given R-value in about 30% less depth and resists air movement better; fiberglass is lighter, does not absorb water and settles less. Both perform well installed to the chart. See the fiberglass vs cellulose guide for cost and moisture trade-offs.
Related calculators
Free app
Run this calculator on your phone
Offline-ready, saves your results, no signup.
Bags of cellulose (19 lb)
92 bags