SmartInsulationCalculator

2026 cost data

Insulation Cost in Arlington, TX (2026)

Insulation contractors in Arlington, TX price close to the national average. Here is what attic, wall, crawlspace and spray foam work should cost in the Arlington metro in 2026.

Insulation prices per square foot

Installed prices — material plus labor — adjusted for Arlington, TX labor rates.

Job typeInstalled cost / sq ft1,500 sq ft attic
Attic blown-in fiberglass (R-49)$1.70$2,553
Attic blown-in cellulose (R-49)$1.56$2,346
Attic fiberglass batts (R-38)$1.47$2,208
Wall batts, open framing (R-15)$1.61$2,415
Wall dense-pack retrofit (drill & fill)$2.39$3,588
Crawlspace floor or wall insulation$1.93$2,898
Basement rigid foam + framing$2.85$4,278
Open-cell spray foam (3.5")$1.79$2,691
Closed-cell spray foam (2")$3.31$4,968
Old insulation removal & disposal$1.43$2,139

What whole jobs cost

Typical projectLocal price range
Attic top-up (1,500 sq ft)$1,380 – $2,392
Full attic removal + re-insulate$2,944 – $4,968
Whole-house wall retrofit (2,000 sq ft home)$3,864 – $7,176
Crawlspace encapsulation + insulation$3,496 – $8,280
Garage conversion insulation$828 – $2,024
Whole-home spray foam (new build)$6,900 – $14,720

Climate zone 2 R-value targets

Department of Energy retrofit recommendations for this zone.

Attic
R-49
Walls
R-13
Floors
R-13
Check your current R-value →

Price your own job

These tables are averages. Punch in your real measurements for a number you can compare against a bid.

Insulation costAtticBlown-in bagsProject total

Statewide context

See how the Arlington metro compares with the rest of Texas.

Insulation cost in Texas →

Insulation cost FAQs for Arlington, TX

How much does attic insulation cost in Arlington, TX?

A 1,500 sq ft attic blown to R-49 runs about $2,170 to $3,064 installed in Arlington, TX, or roughly $1.70 per square foot. DIY with rented equipment cuts that by 45–60%.

Is insulation cheaper to DIY in Arlington, TX?

Yes. Labor is most of an insulation bid, so blowing your own attic or installing batts typically saves 45–60% of the installed price. Spray foam, dense-pack wall retrofits and removal jobs are worth hiring out.

What drives insulation prices in Arlington, TX?

Local labor rates, how far crews travel, attic access, whether old insulation has to be removed first, and the R-value your climate zone calls for. Material prices barely change between states — labor is the swing factor.

Are there rebates in Arlington, TX?

The federal 25C tax credit covers 30% of insulation and air-sealing material costs up to $1,200 per year, and most utilities add their own attic and air-sealing rebates. Always check with your utility before booking work.

Materials for an insulation job in Arlington, TX

Fiberglass Insulation Rolls R13Browse current prices and top-rated options on Amazon

As an Amazon Associate we earn from qualifying purchases. Product links on this page may earn us a commission at no extra cost to you.