2026 cost data
Insulation Cost in New York (2026)
Insulation in New York costs well above the national average — ranked 49 of 51 for installed price. New York sits in climate zone 5, so attics should hit R-60.
Insulation prices per square foot
Installed prices — material plus labor — adjusted for New York labor rates.
| Job type | Installed cost / sq ft | 1,500 sq ft attic |
|---|---|---|
| Attic blown-in fiberglass (R-49) | $2.44 | $3,663 |
| Attic blown-in cellulose (R-49) | $2.24 | $3,366 |
| Attic fiberglass batts (R-38) | $2.11 | $3,168 |
| Wall batts, open framing (R-15) | $2.31 | $3,465 |
| Wall dense-pack retrofit (drill & fill) | $3.43 | $5,148 |
| Crawlspace floor or wall insulation | $2.77 | $4,158 |
| Basement rigid foam + framing | $4.09 | $6,138 |
| Open-cell spray foam (3.5") | $2.57 | $3,861 |
| Closed-cell spray foam (2") | $4.75 | $7,128 |
| Old insulation removal & disposal | $2.05 | $3,069 |
What whole jobs cost
| Typical project | Local price range |
|---|---|
| Attic top-up (1,500 sq ft) | $1,980 – $3,432 |
| Full attic removal + re-insulate | $4,224 – $7,128 |
| Whole-house wall retrofit (2,000 sq ft home) | $5,544 – $10,296 |
| Crawlspace encapsulation + insulation | $5,016 – $11,880 |
| Garage conversion insulation | $1,188 – $2,904 |
| Whole-home spray foam (new build) | $9,900 – $21,120 |
Climate zone 5 R-value targets
Department of Energy retrofit recommendations for this zone.
- Attic
- R-60
- Walls
- R-20
- Floors
- R-30
Price your own job
These tables are averages. Punch in your real measurements for a number you can compare against a bid.
Cities in New York
Metro estimates are on the insulation cost by city page.
Insulation cost FAQs for New York
How much does attic insulation cost in New York?
A 1,500 sq ft attic blown to R-49 runs about $3,114 to $4,396 installed in New York, or roughly $2.44 per square foot. DIY with rented equipment cuts that by 45–60%.
Is insulation cheaper to DIY in New York?
Yes. Labor is most of an insulation bid, so blowing your own attic or installing batts typically saves 45–60% of the installed price. Spray foam, dense-pack wall retrofits and removal jobs are worth hiring out.
What drives insulation prices in New York?
Local labor rates, how far crews travel, attic access, whether old insulation has to be removed first, and the R-value your climate zone calls for. Material prices barely change between states — labor is the swing factor.
Are there rebates in New York?
The federal 25C tax credit (30% of insulation and air-sealing materials, up to $1,200 a year) only covered improvements made through December 31, 2025. For work done now, most utilities offer their own attic and air-sealing rebates, and income-qualified households can get free weatherization. Always check with your utility before booking work.
Materials for an insulation job in New York
As an Amazon Associate I earn from qualifying purchases. Product links on this page may earn us a commission at no extra cost to you.